two options for attaching the Equal-i-zer to a pole tongue style
Pole tongue adapter.
Part # 95-01-5950. Cost for the pole tongue adapter is $116.
This attaches to the trailer frame and spreads the arms out as
if it were an A-frame. The pole tongue adapter attaches to the
frame of the trailer in approximately the same spot as the
normal brackets. Between 27” and 31” back from the center of
the coupler is ideal. You will need to see if this area is
The best option is to use the existing brackets.
Eliminate the two inside link plates. Bolt the outside link
plates directly together around the pole tongue trailer. Two
jam (half) nuts will be needed for the L-bracket to fit
properly. We will include the jam nuts if they are ordered with
the hitch. The brackets also need to be somewhere between 27”
and 31” back from the center of the coupler. The arms will then
ride straight back instead of spread out. There aren’t any
functional or performance issues using the Equal-i-zer this way.